Saturday, September 30, 2006

Children's Books Display - Part 20



Again, here's the children's section of the store as it originally appeared before this project began.



As I did with the bridge components, I painted the the archways over the two alcoves the same base coat of light grey, followed by darker grey stone patterns. That white square in the middle is the wooden base screwed onto the bottom of the tree which is lying on its side.



Here, the tree, sun and clouds have been added. The sun was simply two pieces of cardboard glued together, paper mached and then painted. The clouds were painted on cut out pieces of cardboard, which were then covered in thinner versions of the same white foam sheets of packing material that the leaves were made from. This material was sheer enough that the paint patterns showed through, and gave a nice sheen and texture to the clouds as well.



Now the bear and picnic blanket have been added.

>

The bridge was assembled on the floor, with the three characters screwed onto their respective slats from below. The entire thing was lifted into place via the ladder.



The rabbit is now in place.



Skipping ahead, green material that ended up being perfect for grass was added around the base of the tree. Next, the flowers, which were all cut by hand from yellow paper, were glued to the grass. The picnic basket, settings, and cupcakes were then put in place. The crocodile was added, and so was the robot. Finally, here, the banner was put in place.

Close-ups of various aspects of the display will be in the next post.

>

Here you can see the wood slats that were screwed onto dowels inside his feet. These slats were then screwed into place on the top of the archway.

>

Grass was added around the robot, not only to balance the display, but to camouflage the wood blocks. The empty space behind the robot is meant for the monster with the multitude of eyes. Unfortunately, it broke during installation. Repaired and brought back later, it broke again. Major reconstruction has been done to avoid the problem, and it should be in place by the time I put up the final post in this series, and a look at the display with the monster in place will be included.



Once everything was in place up above, store bought ivy was added to both sides, seemingly climbing the walls, and leading the eye up to the display. Butterflies (also store bought) were also added in various locations, mainly to add some color, and suggested movement.

Except for the monster, and the monkey (which will first appear in the window display) the installation is complete, though there is a possibility that card stock silhouettes, and theater light gel shapes may be added to some of the lighting to give the illusion of more depth to the display, but that is further down the line.

The following two posts will show the display in details, and the window display, completing this series.

Children's Books Display - Part 19


The final two elements that needed to be made were the banner, and the bridge itself. The sides of the bridge were cut from two four foot lengths of 2x8 pine board. These were primed and then painted a light grey color.


The slats for the bridge were seven inch lengths of a 1x4, which were painted white. I wasn't concerned about exact evenness of lengths, or beautiful uniform painting. I liked the idea of it looking somewhat crude and homemade.


Once the initial coat of grey was dry, the suggestion of stones was painted along the sides using a darker grey. The results sort of look like black and white giraffes. I wasn't going for realism, and knew that in the final installation, it would look like what it was supposed to be.

The bridge would later be assembled on site.



For the banner, I traced one of the bridge sides on a large piece of cardboard, so that the arc of the banner would match the arc of the bridge above it. Gloves with pointing index fingers were fashioned out of cereal box and newspaper, and attached to the cardboard banner with masking tape. The entire thing was then covered in paper mache, a somewhat difficult task since the entirety of the banner was longer than any table I had to work on.



Once dry, the banner was primed and then painted a bright red. I printed out the words "Children's Books" in a large font size on a few different colored sheets of paper (I ended up only using white, yellow, and off white), which I ripped into the individual letters, then decoupaged onto the banner using white glue followed by a coat of clear gloss. I thought this would look better than any hand painted lettering I could manage on a somewhat uneven surface, and would also be easier to read from a distance.

Thursday, September 28, 2006

Children's Books Display - Part 18



The two children I ended up nicknaming "Hansel and Gretel" for obvious reasons. Humid conditions required that I dry them in the oven.



The boy was constructed in essentially the same way as the girl. His features were all made using the same cereal box ears, and paper pulp/wheat paste mix for eyebrows, nose and mouth. The boy's hair was also made from this mix, as I essentially covered the entire hair area with small pyramids made from this mix.

Here, I've tested out the eye placement before painting. It's amazing how a couple of shiny black plastic beads, essentially, can bring even the most unfinished construction to life.



Next, he was primed...


...and painted. All of the painting was done with acrylic paints.



As with the girl, I didn't bother painting any areas I knew would be covered with clothing. The sneakers (still wet here) and socks were also painted on.

I spent a lot of time painting the boy's Chuck Taylor's, only to find out that once he was dressed, you really couldn't see them. This was fine with me in the end, as I'd already spent a good amount of time, laboriously threading a shoelace through one of them. I didn't bother with the other one.

The boy stands about a full head taller than the girl. This was done because he was always meant to be part of the window display, and so needed to be large enough to be visible for some distance, and able to attract attention. If I can manage it, I'll probably incorporate him into the main display at the end of his time in the window.

Children's Books Display - Part 17

At this point there were only two characters left to make; the boy and the girl. The girl came first as she was an essential element of the permanent installation, while the boy was, literally, window dressing.



Like many of the prior characters her body was essentially a loaf shape of stuffed newspaper with garden hose and coathanger wire limbs. Her feet were blocks of wood. Her head was a big ball of wadded up newspaper.




She was initially paper mached without her hands, which were done seperately and paper mached to her wrists later. The hands themselves were simple carborad cutouts since no articulation was required.

Her facial features were added next. Her ears were cut from a cereal box. I used the same paper pulp/wheat paste mix as in prior characters to sculpt on her eyebrows, nose, lips and dimples...



...which are easy to see in this photo of her with her primary paint application.


Next, her skin was painted. I didn't bother with her torso since I knew it would be covered by clothing. The socks and mary jane shos were also painted, as were her teeth, lips, cheeks and eyebrows.

The eyes themselves are plastic stuffed animal eyes. The eyes were an initial concern. I was not attempting to make realistic looking children. When I've depicted children in my two dimensional collage art, they've all tended to have large eyes. I knew that merely painting the eyes onto the face would look flat and lifeless. I toyed with using ping pong balls, like I did in the cyclops and a few random paper mache creations I'd done in the past, but feared that on the children it would look freakish. As I'd already gone past my self imposed deadline due to uncooperative weather (it was necessary to construct everything outdoors), I didn't have time to experiment. I ended up deciding to go in the other direction, giving them small beady eyes, which ended up working pretty well I think.



A dress sewn by my wife specifically for this piece was added, followed by hair. This hair was actually a dress up wig which had started appearing in inexpensive abundance with Halloween right around the corner.

/>

Books were added next and she was then installed. Originally, she was supposed to be posed in mid stride, with one foot elevated. I had some concern about all of her weight being held up by one foot screwed to the bridge, as her balance wasn't as evenly distributed as I had hoped, so at the last minute I decided to also screw her second foot to the bridge, which gives her a bit of a lean to her right. This is okay, as I figure she's compensating for the weight of the three books she's carrying, and simply walking with a bobbing weave like a kid listening to interior music.

Children's Books Display - Part 16

The installation itself also contained a monster character. This character was based on a sketch for a character I created for one of the areas of planned upgrades to my main website. When it was time to add it to the main website, it went through a couple of mishaps ( see Children's Books Display - Part 1 ) which will be discussed in further detail when I get to the posts on the installation process itself.



As can be seen here, the monster was made of very simple materials. Here the head (all newspaper) and arms (cardboard) have already gone through the paper mache process. The body was a simple mailing tube with foam taped around it to give the monster a bit of a hunchback. The legs are garden hose inserted with coat hanger wire and wooden blocks for feet.



Here are the legs after being paper mached. As you can see, toes have been added to the feet. These were simply wedge shapes made from cardboard. Since it would be covered in fake fur, there was no need to paper mache the body itself and it was left in its raw form.



Here's the completed monster. The eyes are the same plastic cat's eyes that I used on the crocodile. The teeth are the tines of plastic forks. The head was screwed onto the tube before the fur was added, as were the legs. Once the fur was added, slits were cut in it where the arms needed to go. These were also screwed onto the cardboard tube.

Children's Books Display - Part 15

Besides the characters, I also had to make some of the props for the scene. A suitably sized tea set was easily available, but other things were more elusive, such as a picnic basket which was the appropriate size for the bear and rabbit. I made this simply by making a box out of cardboard, complete with a hinged lid and a handle.


This was then covered with paper mache, primed, and...



...painted with slight crosshatching to suggest the weaving of the basket. The handle was fastened to the basket with those brass fasteners that most of us probably remember from school reports. Of course, the day after the display was up, I actually found a nice, inexpensive basket the size I needed, but decided to leave mine in as it seemed to fit the overall look better than a real basket would have.



A similar problem cropped up when it came time to provide food for the picnic. Plastic and wax fruit was all too big for the scale. I also felt that it would look jarring to have realistic fruit and vegetables mixed in with the cartoonish looking animals, so I opted to make the food from scratch.

I then realized that since the display was going to be elevated about seven or eight feet in the air, that it would be really difficult to see anyway, so I opted to make too simple cupcakes, since these would be more visible than say, a fish, or sandwich. They were simply paper mache with the cherries painted round tipped pegs from a board game which was missing too many pieces to save. Before they were painted they were pretty unconvincing. Even my seven-year old daughter referred to them as my "ridiculous cupcakes."

Other props were made such as clouds and the sun. The "making of" pictures of these were among those accidentally deleted, so I will discuss their construction in the posts concerning the actual installation of the completed display.

Wednesday, September 27, 2006

Children's Books Display - Part 14





The next character was the chicken. She was relatively simple, though I wish I'd given her a more exaggerated, cartoony shape with a longer neck and smaller head. Essentially she was a newspaper wad body and head. When this form was made, i paper mached it, then after it was dry, cut open her belly, removed the newspaper stuffing and replaced it with one of those green styrofoam balls used for arranging plastic plants. This ball was a good anchor for her legs which were simply a couple of wooden dowels. Her toes were the same heavy gauge florist wire I'd been using on other characters. I paper mached her closed, then attached wings, and a comb cut from a cereal box. These were also covered in paper mache.



Her beak was simply a pyramid shaped attachment made from the paper pulp/wheat paste mixture mentioned in earlier posts.



The chicken was then primed...


...and painted. I wasn't so sure about the width of the black stripes on her legs, and almost painted over them, leaving them just a plain orange, but felt it gave her character.



Originally, she was going to have a copy of "Animal Fair" tucked under her wing, but it just didn't look right, so I left it out. I tried hard to get this to work since Alice and Martin Provensen are favorites of mine and I wanted to include them in the display, but it was not to be.

Tuesday, September 26, 2006

Children's Books Display - Part 13

As I mentioned in an earlier post, I knew that I'd need characters for the accompanying window display. While some of them would later be incorporated into the main display, some would not. This monster was one of extra characters.



Unlike the other characters, this one was not an original creation. It's based on a monster from the old Japanese television series "Space Giants." I love the design of the Japanese monsters from the 60s and early 70s, including the weird cyclops Belzor (seen here in vinyl toy form courtesy of this set of flickr photos ).

My six-year old son is also a big fan and has a really large Japanese monster toy collection. This monster was done as a tribute to him, and in fact he's already claimed it for his room once the window display is taken down. So much for putting it on ebay.



This was made in components which were assembled once dry. The body was simple a loaf shaped construction of newspaper, with garden hose (with coat hanger wire insert) legs, and scrap wood scrap feet. The arms are built up cardboard which were screwed into the sides of the body and up and down articulation. The three tubes on the head are simply long narrow newspaper cones. The eye socket is built up using the paper pulp/wheat paste mix described in previous entries.


The eye itself is merely a ping pong ball which was painted with several coats of white and a black pupil. The entire thing was painted the same color green as the leaves on the tree, with pink highlights inside the head tubes.

All in all, this was a pretty simple creation and he stands really well on his own without any additional support.

Monday, September 25, 2006

Children's Books Display - Part 12

The robot was a pleasure to make, maybe because there was no paper mache involved. It was also really simple. Here are the basic raw materials that went into its creation. As you can see, it was simply two small plastic flower pots, plastic funnels for feet, lengths of garden hose for the arms and legs, and cut coat hanger inserted into the lengths of hose to lend it support and posability. This hose/coathanger wire combination was a staple for many of the characters made for this display.




Here's the plastic flower pot that was used as the robot's lower torso. I traced the circumference of the hose onto the pot where the leg holes and arm holes needed to be, then cut them out with a utility knife. After that, the lengths of wire -stiffened hose were threaded through the holes. Now that the arms and legs were in place, I punched holes into the lips of the two pots and screwed them together, which was actually a bit more difficult than you'd think, simply because there wasn't a lot of room to work with. The funnel feet were then glued into the ends of the leg hose, though they were such a snug fit that I could have done without the glue. Four plastic spoons made of the robot's clamp-grip hands and were also glued into the arm hose ends.



The entire robot was then painted with black acrylic paint as a base coat.




I then dry brushed layers of copper, brown, yellow, and umber acrylic paint to give it that rusty look. The details were simply various pieces of round plastic, cardboard and foam that were glued on and painted. The rivets were also tiny foam circles. The antennae came from a broken plastic suction-cup tipped arrow that went to an archery toy my son had picked up a dollar store.

The oxidized rust was simply a mixture of bluish-green paint painted on. It's amazing how the paint is able to do a fair job of disguising the obvious, and basic materials that served as ingredients for this robot's body.

I also really appreciate how the natural contours of the flower pot give the illusion of the robot having a smile. I had hoped this would happen, and it was part of my original sketch, but I wasn't sure it would actually translate to 3 dimensions until I saw the robot assembled.



The antennae was painted to match the body, and a silver star was added to the chest. A fake copy of "B-9 The Hungry Metal Eater" was glued into his hand. I inserted lengths of dowel into the inside of the funnels, which I used as an anchor to screw the robot to a length of board which was screwed down to the display area. This board was masked with a synthetic green fur that I picked up at a fabric store. It made great grass.

Sunday, September 24, 2006

Children's Books Display - Part 11



Before moving on I thought I'd take a small amount of space to discuss the books in this piece. Since the display id for the children's book section of a book store, I felt it was appropriate to either show the characters reading, or carrying books. I knew right away that I didn't want to be arbitrary in my choices. I wanted the books to be ones that I enjoyed and I also wanted the books to be somehow related to the character posessing them.

For some characters, the choices were easy. Others, less so. One thing I didn't want to do is go for the obvious, such as having the monkey reading "Curious George," or the bear reading "Goldilocks and the Three Bears." I wanted the books that were still in print to be classic enough that the well-read child would be in on the joke, and for the out of print books I chose, I wanted the connection to be a little more obvious.



The Books I chose decided upon were these...

The opossum is reading Shel Silverstein's "The Giving Tree" which seemed appropriate for an arboreal creature.

The bear is reading "Blueberries for Sal" by Robert McCloskey which features a bear cub and small girl exchanging parents.

The monkey is reading "Caps For Sale" by Esphyr Slobodkina, which, of course, features monkeys.

The ant is carrying copies of "The Nutshell Library" by Maurice Sendak and "Stuart Little" by E.B. White, chosen because they reflect the ant's diminutive size.

The girl is carrying copies of "Little House in the Big Woods" by Laura Ingalls Wilder, the 1st Nancy Drew book "The Secret of the Old Clock" by Carolyn Keene and "Cherry Ames, Visiting Nurse" by Helen Wellswhich was a tribute to my wife and my daughter and their childhood favorites.

The chicken was meant to be carrying a copy of "The Animal Fair" by Alice and Provensen, two of my favorite artists, but it just didn't look right tucked under her arm, so the idea was dropped.

The Robot holds a copy of "B-9 The Hungry Metal Eater" an "Iron Giant" type story by Ester Hauser Laurence with illustrations by Ron Bradford.

The multi-eyed monster has copies of "How to Care for Your Monster" by Morman Bridwell and "Movie Monsters" by Alan Ormsby, two of the most important books of my childhood, and two of my most treasured books today (See the April 11, 2006 entry for more on the Ormsby book).

The crocodile is reading "Peter Pan" by J.M. Barrie. Not that anyone will ever see it, but he's reading about the crocodile's appetite for Captain Hook.



As discussed in previous posts, the books were all reduced photo copies of back and front covers glued onto an appropriately sized white paper wrapped cardboard rectangle. The books being read also have reproductions of a couple interior pages. As you can see in one of these photos, the books are quite small, though I ended up having to make a larger scale version of "B-9" once the robot itself was completed. The copy depicted here proved to be too small.